On 18/10/2019 16:46, Dave Plowman (News) wrote:
In ,
Roger wrote:
On 10/10/2019 19:03, Dave Plowman (News) wrote:
Been fixing up some sash windows which are basically about 130 years old.
Had a broken glass after what look like a bird it it - or bullet. ;-) And
a sash cord.

So decided to replace all the sash cords at the same time, and with new
parting and stop beads. So got the type that takes a nylon brush for best
draught proofing. And wondered if anyone knows how long the brush is
likely to last? It will hopefully stop any rattles too, in a wind.


I've got a lot of sash windows in my holiday flat, which is in a Grade
II listed building - so little scope for double glazing.

I've replaced all my beads with the nylon brush type. They have improved
noise and drafts to some extent, but not as much as I hoped.

I've also replaced the cord to sash attachments with these
https://www.mightonproducts.com/cordclam-cord-retainer which make it a
doddle to remove and replace the sashes in future - e.g. for painting.
Oh, and the staff beads are screwed rather than nailed on like the old
ones - also facilitating easy removal.

I've also used screws for the staff beads. Couldn't think of a similar way
to fix the parting beads, though.


My parting beads don't use any fixings. They are an interference fit in
their grooves, and have to be tapped in with a block of wood and a hammer.
--
Cheers,
Roger
____________
Please reply to Newsgroup. Whilst email address is valid, it is seldom
checked.