It's the solenoid
On 09/29/2019 03:43 PM, Clare Snyder wrote:
Yes. You will need to drop the pan and "possibly" the valve body. Not
a job to do on a dirty floor
Try not to drop the valve body into the pan... When I was helping a
friend work on his '59 Buick I was fortunate enough to realize the
implications as he removed the last bolt on the valve body and scuttled
out of the way. The suction held it in place for a few milliseconds.
Love that Dynaflow. It was like driving a boat. Drop the hammer on the
401 and the car would eventually leave the dock at a stately pace. The
soft coil spring suspension enhanced the effect.
|