It's the solenoid
rOn Sun, 29 Sep 2019 09:52:25 -0500, Terry Coombs
wrote:
* Everything hooked up except the plug at the trans , and the fuse is
not blowing . The plug was inserted a quarter turn clockwise , corrected
that but it was still blowing the fuse . So I started unplugging harness
connections starting at the firewall . Unplugging from the trans finally
stopped that . Now the question uppermost in my mind is can the solenoid
be replaced without pulling the trans ?
Yes. You will need to drop the pan and "possibly" the valve body. Not
a job to do on a dirty floo
|