There have been lots of storms, maybe a spike did it.
Brian

--
----- --
This newsgroup posting comes to you directly from...
The Sofa of Brian Gaff...

Blind user, so no pictures please
Note this Signature is meaningless.!
"The Natural Philosopher" wrote in message
...
On 27/09/2019 10:49, NY wrote:
"harry" wrote in message
...
On Friday, 27 September 2019 09:54:45 UTC+1, wrote:
Three phase DB. Turned up and tried to turn the lights on, to find that
all the MCBs controlling circuits with lights (and some without), plus
a submain that also had a lights circuit running from the secondary DB,
we're off.

The only possibly explanation I can think of is that someone had turned
them all off, because they were blindly trying to turn off the lights
after working there and hadn't noticed the timer override master
switch. Problem with that theory is that in order to turn the lights on
in the first place they would have had to know about the override
switch!

Is there any possible electrical fault which could trip half a dozen
circuits and leave no signs, a maximum of 24 hours since the lights
were circuits were last on. There was no evidence of water leakage.

If they have tripped, the toggles would be in the mid position. To
reset/turn back on, they have to be turned to the fully "off" position
and then "on".
So it should be obvious if they have tripped or been turned off.

That assumes the MCBs have that design. Ours (MCBs and RCDs) have only
two positions: fully on or fully off - there's no half-way state to say
"tripped" as opposed to "turned off manually".

Maybe it's different for 3-phase distribution boards rather than domestic
1-phase ones.
Overvoltage on one or more of the phases can cause breakers to trp


--
Climate Change: Socialism wearing a lab coat.