Drill hole in tiled MDF
On 26/09/2019 14:22, GB wrote:
I have a concealed cistern behind MDF, which has been tiled.
I am fitting a new flush valve in place of the old syphon. It's mostly
done, but I need to recess the button. That needs a 40mm hole through
the tiles and MDF, in place of the existing rather ragged 30-35mm hole.
What's the best way of doing that? 40mm drill will tend to wander. I
have a 1/2" belt sander, but that'll take ages. Any suggestions please?
Fix a bit of wood across the existing hole so you have a centre.
Just glue it to the back of the MDF with No More Nails etc.
Mark the centre and drill your new hole with a diamond core drill.
|