On 23/08/2019 09:04, jeikppkywk wrote:


"The Natural Philosopher" wrote in message
...
On 22/08/2019 21:46, jeikppkywk wrote:


"The Natural Philosopher" wrote in message
...
On 22/08/2019 08:14, Steve Walker wrote:
On 22/08/2019 07:26, The Natural Philosopher wrote:
On 21/08/2019 20:32, Steve Walker wrote:
On 21/08/2019 20:02, tony sayer wrote:
In article , Martin Brown
'''newspam'''@n
ezumi.demon.co.uk scribeth thus
On 20/08/2019 23:04, Max Demian wrote:
On 20/08/2019 19:21, Andy Burns wrote:
Max Demian wrote:

How do that with sodding great dynamos all round the country
that all
work in different ways?

By all running at 50Hz, and getting them into sync before
joining them
to the grid.

I heard on a radio programme recently that the generator
people are
relaxed about the overall synchronisation and they don't have
clocks
saying "electric time" and "actual time" in the power stations
so that
"cooker clocks" might not be reliable. Does anyone know if
this is true?
There must be loads of synchronous timeswitches about, and
quite a few
clocks - I think I saw one in a local hospital.

They are legally bound to keep the twenty four hour average
extremely
close to 50Hz - ISTR the exact tolerance is still an official
secret.

Excursions 0.1Hz either way are not uncommon at times of heavy
or light
loading. They play catchup in the night and run slow in daytime.

A synchronous motor mains clock could be running 0.2% slow for
most of
the working day so in an 8 hour shift it could drift by about a
minute
in the employers favour. These days most modern systems are
crystal
controlled and drift around 15s a month or less if trimmed.

Cooking wouldn't notice a 0.2% error in timing. GPS would!


Do that many clocks use the mains these days?, went to the leccy
wholesalers the other month quite a good range, all battery
Radio ones
and aren't they using much the same or quartzÂ* on cookers and
the like a
lot nowadays?..

Probably any mains powered clock. Why bother using the crystal,
when mains frequency (over time) is more accurate? The crystals
are then only used for battery back-up.

One very simple reason. Cost.

A synchronous motor and gearbox costs more than a quartz crystal
and a chip and a stepper motor. Or digital LCD display.

Most mains clocks are digital these days and do time themselves
from the mains. Built into ovens, cookers, boilers or just
stand-alone bedside alarms. Wall and mantlepiece clocks tend to be
battery powered and so are purely crystal based (although our wall
clocks are good, old clockwork).

I dont think most people undersatnd engineering cost, but them
most peole havent designed stuff to be mass produced and sold.

Most mains clocks are not run by synchronous motors now, they are
LCD or LED and controlled by a single chip. However, the mains is
there and it makes more sense to time from that (for the accuracy)
and so they do.

A crystal costs next to nothing. Why would they use mains?It will
end up costing more


One of the big drivers for electric car windows is that a motor
and gearbox and switch is a little bit cheaper than a handle.

Is it? Fair enough, but why did we have many years with cars only
having electric windows as optional extras or only in the front?


Manufcturers stuck in teh age of te dinosaur/EU

Why do we have touch screens?Â* Menus? because they are cheaper
than proper controls.

Yes. Not just parts and production costs though. A big driver is
that software is easy and "cheap" to add new features to or to
provide different options for different trim levels of cars or
levels of other consumer goods.

Cost drives engineering development.

And in te comnsumert market, creeping featursim and novelty.
Useless features are added that dont cost anything more than a bit
of software, to make everything massively over complicated, which
appeals to low brow users.

I am perfectly happy to have lots of extra features, as long as
they don't get in the way of the basic, day-to-day operation - and
too often they do.

Exactly.

I simply cant be arsed to learn how to set a modern microwave fpr '3
mintes at half power please' when its all buttons and menus,

Its 1 second on two rotaryÂ* dials here.

Commercial microwaves have knobs

The prize for the worst user interface in te workld gose to smart
phones

I missed about 30 calls before I worked out how to answer it

What ever happened to 'lift handset and talk'

Not viable with a mobile phone.

Eaiily viable to have one button that you press to 'lift handset'

Thats what the ones with physical buttons do have.

Not viable with a touch screen tho.
SO DONT HAVE JUST A TOUCH SCREEEN


--
All political activity makes complete sense once the proposition that
all government is basically a self-legalising protection racket, is
fully understood.