View Single Post
  #13   Report Post  
Posted to uk.d-i-y
John Rumm John Rumm is offline
external usenet poster
 
Posts: 25,191
Default Water softener and green seepage

On 08/07/2019 19:47, harry wrote:
On Monday, 8 July 2019 17:05:31 UTC+1, John Rumm wrote:
On 07/07/2019 12:42, Gareth's was W7 now W10 Downstairs Computer wrote:
On 07/07/2019 12:34, Graham. wrote:
Gareth's was W7 now W10 Downstairs Computer hea
Wrote in message:
Since having a water softener installed, some of the
Yorkshire fittings***** have a green powdery leakage.

Clearly, the nuts on the fittings need to be nipped up
again, but is the greenness indicative of a high rate of
corrosion in the system due to the salt, or is it just
a reaction to the air once it had seeped?

***** had previously fitted new taps myself; obviously
a plumber would have done it with all soldered connections
if only to make things difficult for amateur plumbers
in the future?



Maybe I've misunderstood,Â* Yorkshire fittings are soldered.

Anyway, plumbers seem to use plastic whenever they can.


Perhaps I misunderstood, it being some years since doing
any plumbing myself, but I thought the Yorkshire fittings
were the ones I used, those with a crumpable olive and a
big nut to compress it?


Those are compression fittings:

http://wiki.diyfaq.org.uk/index.php/Compression_fitting

Yorkshire fittings are a specific type of "capillary" solder fitting
where there is a ring of solid solder built into the fitting during
manufacture. So you can simply clean and flux the pipe, then just heat
the fitting without the need to add solder manually.

They look like:

https://www.screwfix.com/p/yorkshire...-10-pack/24368

Similar to end feed:

https://www.screwfix.com/p/flomasta-...-20-pack/81276


They make all types.


Indeed, its a brand... however If someone refers to a "yorkshire
fitting" without further qualification, its a fairly safe bet they mean
their famed solder ring fitting.


--
Cheers,

John.

/================================================== ===============\
| Internode Ltd - http://www.internode.co.uk |
|-----------------------------------------------------------------|
| John Rumm - john(at)internode(dot)co(dot)uk |
\================================================= ================/