Thread
:
Question about varnishing hard wood
View Single Post
#
7
Paul Moore
Posts: n/a
Question about varnishing hard wood
Thanks Lads,
Indeed, I only sanded the varnished surface after the first coat.
Paul
--
--
-nospam
Remove "-nospam" for real address
"Paul Moore" -nospam wrote in message
...
Hello all,
I've been varnishing an old oak cabinet that we've had for years. I
started
out from scratch by sanding off all the old grunge back to the bare wood.
I've applied several coats of varnish and it gives the appearance that the
varnish is not evenly applied. That is, the darker grain seems to repel
the
varnish, whereas the lighter areas have taken the varnish no problem. To
the
touch, it feels as if the varnish layers consists of a series of tiny
hills
and troughs, instead of being evenly smooth.
Should I have used some kind of primer or preparation before starting? Can
I
use it now, or do I have to restart from the bare wood.
Many thanks,
Paul
--
--
-nospam
Remove "-nospam" for real address
Reply With Quote