View Single Post
  #10   Report Post  
Posted to uk.d-i-y
Brian Gaff Brian Gaff is offline
external usenet poster
 
Posts: 10,998
Default DIY Underfloor heating?

No not in the uk really. Its a slightly less cold version of outside where
it does not rain.
Brian

--
----- --
This newsgroup posting comes to you directly from...
The Sofa of Brian Gaff...

Blind user, so no pictures please
Note this Signature is meaningless.!
"ARW" wrote in message
...
On 20/05/2019 21:43, Jeff Layman wrote:
On 20/05/19 16:55, Steve Walker wrote:
On 20/05/2019 16:38, R D S wrote:
I want to overboard a draughty, uneven floor.

And as I could do with raising it about an inch I was thinking about a
thick insulation inbetween.

Then I started thinking about UFH and there are pre-grooved polystyrene
panels that would be ideal.

So just wondering if anyone has any experience of DIY UFH or any
opinions of UFH in general.

The system we have in the conservatory is embedded in the screed, but
could have been used as you mention.

Our add-on system runs off the normal central heating, via a motorised
valve and unvalved return (like a radiator), but that is far too hot, so
there is a blending valve and a separate pump.

Water is circulated by the dedicated pump, from the floor, through the
blending valve and back to the floor. If the water is too cool, the
blending valve mixes it with some from the main central heating and the
excess naturally exits to the main system.

It works well, but there is about 4" of screed, so warm-up and cool down
are slow. You need to have the heating on well before you need the room
and off well before you finish using it.

Cats love it though!


We had a conservatory put up about 5 years ago. Floating floor with
concrete beams and breeze block, covered with screed and 75 or 100 mm of
Celotex (I can't remember the actual thickness). Then laminate.

The UF heating was by electric film - 1.8kW. At the time, we considered
hot water - either UFH or radiators, but connecting it up to the current
HW system required approval, and the boiler was running pretty near to
capacity anyway. But we find the UFH is not sufficient to keep the
conservatory warm in winter, and is very expensive to run. Really, there
aren't enough decent days in winter to merit using the conservatory
anyway, and when it is sunny that will supply a useful amount of heat,
and it can be supplemented with a fan heater. I'm not sure that any type
of UFH in a conservatory is justified unless the conservatory is triple
or quadruple glazed.


Jeff, I have yet to find any justification for a conservatory.

--
Adam