On Sun, 05 May 2019 11:29:28 -0700, spuorgelgoog wrote:

On Sunday, 5 May 2019 17:30:23 UTC+1, David WE Roberts (Google) wrote:
However as the with of the room is about 2.4 metres it is a good
thought that a standard board such as ply in 2400 * 1200 would cut down
to make a desktop without paying through the nose for chipboard and
plastic. Hmmm...no, 1200 is just too deep. However a standard worktop
is 600 mm so an extra few 100 mm might not go amiss. 900 mm perhaps?

The excess depth could be ripped down to give you a matching shelf or
two full width.

Just watch the diagonal length and non-square walls for manouvring it
into place.

Owain

Sadly a full width shelf across the window might be counter productive. :-)

I suspect some gaps might end up being filled at the sides.

Probably trunking across the back to hide the cables.
Hmmmm.....use the excess to make matching trunking?
Or just do it the easy way with plastic?


Cheers


Dave R


--
AMD FX-6300 in GA-990X-Gaming SLI-CF running Windows 7 Pro x64

---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus