On 04/05/2019 17:29, ARW wrote:
On 03/05/2019 22:06, John Rumm wrote:

I am not convinced about the T&E into the Henley - I can only see
tails of various sizes. The T&E you can see just looks like that pair
of them above the board clipped to the wall continuing down.

I can't see where those slimmer tails from the henley go either.



I don't think that "slimmer" is the correct word.

If the meter tails are 25mm and double insulated (although I suspect
that they are 16mm) a simple comparison of od diameter from the photo
says that the "slimmer" cables are "seriously under sized".

Depends on what they are feeding - quite often you see very slim tails
feeding things like Economy 7 time switches.


--
Cheers,

John.

/================================================== ===============\
| Internode Ltd - http://www.internode.co.uk |
|-----------------------------------------------------------------|
| John Rumm - john(at)internode(dot)co(dot)uk |
\================================================= ================/