Thread
:
Phone sockets to patch panel
View Single Post
#
6
Posted to uk.d-i-y
The Natural Philosopher[_2_]
external usenet poster
Posts: 39,563
Phone sockets to patch panel
On 17/04/2019 20:38,
wrote:
Hi All,
I have run cat 6 cables to all rooms in my house all terminated in a comms cupboard. The BT master socket is in another room and again a cat 6 cable is run from it to the comms cupboard terminated with a BT socket. In the comms cupboard I have terminated all cat 6 cables in a patch panel.
So, the question is how best to I connect the 3 patch panel ports which are connected to phone sockets in rooms to the BT socket. So far I have thought of the following
1. Create patch cables with RJ45 one end and BT socket the other. The connect these into the BT socket via a normal phone splitter
2. Create a 3 way cable by having 3 cables with RJ45 connectors one end and the other ends all soldered together. Then solder this onto a phone cable connected to BT socket
3. I tried looking for a RJ45 splitter (RJ45 version of a normal phone one) but couldn't find one
Neither of which seem ideal. Anyone have any better ideas?
Also, I assume I have to terminate the cable from the BT master socket in a BT socket rather than terminate it in the patch panel?
Thanks in advance for your help
PABX?
Lee.
--
€œIdeas are inherently conservative. They yield not to the attack of
other ideas but to the massive onslaught of circumstance"
- John K Galbraith
Reply With Quote
The Natural Philosopher[_2_]
View Public Profile
Find all posts by The Natural Philosopher[_2_]