In article ,
wrote:
On Sunday, 14 April 2019 11:27:49 UTC+1, Dave Plowman (News) wrote:
In article ,
tabbypurr wrote:
On Saturday, 13 April 2019 11:46:24 UTC+1, Brian Reay wrote:
On 13/04/2019 11:32, Tim Watts wrote:
On 13/04/2019 09:35, DerbyBorn wrote:

What is the easiest way to seal with a hairline crack in the
overskim of a plasterbaord covered wall.

Do I need to rake it out or can I apply something that will
penetrate and fill it (Creeping Crack Cure?)

I paint over with PVA a couple of times to bond the crack, then,
if it's beyond what paint will fill, a smear of fine filler.

I've found mixing 'polyfilla' (the powder stuff) with a mix of
water and some PVA, I guess the mix, works well- provided it isn't
too wet when applied. It is hard to sand down, so don't leave too
proud.

Don't leave it proud at all would be more sensible Plasterboard
is prone to move a bit, reappearance later is fairly likely. You
won't prevent that.

This is the problem, hence needing a flexible filler. That also grips
well to the board.

Flexible filler won't solve it, the percentage of movement in a hairline
crack is too large. Filling it at painting time is trivial.

All I can say is it worked here. Whereas pollyfilla etc didn't.

--
*Someday, we'll look back on this, laugh nervously and change the subject

Dave Plowman London SW
To e-mail, change noise into sound.