On 22/03/2019 01:26, wrote:
On Thursday, 21 March 2019 16:41:09 UTC, dennis@home wrote:
On 21/03/2019 16:12, tabbypurr wrote:
On Thursday, 21 March 2019 12:53:00 UTC, dennis@home wrote:
On 20/03/2019 19:39, ARW wrote:
On 20/03/2019 18:11, Scott wrote:

I discovered a problem with a join in a ring main and decided to
replace the faulty connector with a terminal block.Â* I wondered if
this needs to be rated at 30A to correspond with the fuse (RCBO) or if
15A would be okay on the basis that it is a ring and some of the
current will go each way round.

On the Brunel principle I am fitting 30A but I am curious to know.


https://www.youtube.com/watch?v=2uYD8e7idnY


The video shows that the connectors will carry the current when new.
But what happens after they have had a few thermal cycles?
I would think the wire nut and the choc block will fail first.

Choc block & crimp are gas-tight, so should last.
Wago might be gas tight if the wire is never moved, it certainly won't be if any movement occurs.
Wirenuts aren't gas tight. US electrical fires are a testament to that.


NT


choc block are not gas tight.

yes they are. You're free to go & learn something.

That does rather depend on if there was adequate screw pressure created
when the termination was made. Also on terminations that cycle through a
larger temperature range, its not uncommon for terminal pressure to
loosen with time.


--
Cheers,

John.

/================================================== ===============\
| Internode Ltd - http://www.internode.co.uk |
|-----------------------------------------------------------------|
| John Rumm - john(at)internode(dot)co(dot)uk |
\================================================= ================/