Couple questions for you:

1) Is your resevoir tank laying down on its side, or is it standing
upright? If its laying on its side, try standing the unit upright.

2) In regards to the bubbles, are they along the sides of the glass, or are
they all over in the water making it appear cloudy?

Here's one thing you might want to try. Open up the RO faucet, and drain
the resevoir tank completely. It should get to the point where the water is
trickling very slowly out of the faucet. Then shut the faucet off, and let
the system fill back up completely. See if that fixes the problem.

--
Mike Ross
Culligan Rochester


"Jerry Soran" wrote in message
om...
Mike,

I am on municipal water.

Jerry

"Michael Ross" wrote in message
...
Jerry,

First question I would have to ask you is, are you on municipal water,
or on
well water?

--
Mike Ross
Culligan Rochester


"Jerry Soran" wrote in message
om...
Hi,

I've been using a SQC-4 reverse osmosis unit from Water Factory
Systems for a little over 6 months. When the system was first
installed, I noticed lots of air bubbles forming in the filtered water
and upon asking the installer I was told that the bubbles woulds
gradually decrease as we used the unit. Well, it's been more than 6
months and the bubbles are still there, first everywhere in the water
after filling up a glass and slowly rising up to the surface and
hanging there like patches of bubble clouds.

My question is, is this a normal occurance for RO filtered water? If
not, what is causing it and how can it be fixed?

Thanks.
Jerry