Reducing width of wooden door
On Wed, 13 Mar 2019 22:43:17 +0000, John Rumm
wrote:
If that
happens then you may need to cut it slightly undersize (say 1/4" total)
and then plant a pine lippings on the cut edges - if you add 1/8"
strips, and then plane a bevel on the corners you wont even see the join.
If you have accurate means of cutting: cut two 1/8" strips off the sides, then
cut the door so that sticking these strips back on gives you the width you want.
Feasible with a table saw, or sawboard and thicknesser, and maybe you can pull
it off with just a sawboard...
Thomas Prufer
|