On 19/02/2019 19:03, Jim K.. wrote:
alan_m Wrote in message:
On 19/02/2019 16:10, Jim K.. wrote:
I need to lift a huge yorkstone flag, approx 4ft by 4 ft by 4 inch
thick, by about 2 inches, & rebed on mortar etc as
necessary.
Is it rocking? Ff so just level up the side that appears to drop and
shovel in the mortar on that edge/corner. Bearing in mind the weight
and size I doubt if you need to re-bed the whole slab - gravity will
keep it in place.
Not rocking, it "just" needs raising 50mm to accommodate a new
paving scheme.
Are your new paving slabs thin enough to go on top of the current one?
--
Cheers,
John.
/================================================== ===============\
| Internode Ltd -
http://www.internode.co.uk |
|-----------------------------------------------------------------|
| John Rumm - john(at)internode(dot)co(dot)uk |
\================================================= ================/