DIYbanter - View Single Post

Ralph Mowery

In article , says...

* Y'all need to re-read my post , the blades were checked for alignment
by measuring from a point on the ceiling , all were within 1/16" of the
same - 35 1/16 to 35 1/8 . The fan was then balanced with the included
kit according to the instructions at the highest speed setting . At
EVERY speed but the nest to slowest this fan is rock steady , not a
quiver . If the fan blades were not balanced or the blades were not in
the same plane it should wobble at ALL speeds , not just one . As I said
, unless you look for it the wobble is so slight that you'd never notice
it .

Go here for some good info on the fans.

One other thing that is mentioned is the fan rocking back and forth, or
wobbling ? The link explains it.

http://www.casablancafanrepair.com/H...nuals/Chapter1
4/SM_WobblingFan_P1.htm