On 2019-01-13 12:45 p.m., Clare Snyder wrote:
On Sun, 13 Jan 2019 10:17:33 -0700, % wrote:

On 2019-01-13 9:54 a.m., trader_4 wrote:
On Sunday, January 13, 2019 at 11:02:32 AM UTC-5, % wrote:
On 2019-01-13 6:50 a.m., trader_4 wrote:
On Saturday, January 12, 2019 at 3:32:11 PM UTC-5, % wrote:
.

it used to toss snow 20 or 30 feet ,
now it's maybe 5 feet , the auger turns ,
the impaler goes but still it doesn't blow snow

Is there sufficient snow available and being fed in? If there is only
a couple inches and the machine is moving slowly, snow won't get thrown
very far because there isn't enough volume to propel it. With mine
if I try to do just a couple inches at low forward speed, the snow
just dribbles out the chute or goes a few feet.

it's at least 12 inches of snow and when i give it gas , it stalls in
the deep stuff

But at full speed, if you go slow, it stays at full speed, but only
blows it a few feet? I presume it's not real heavy, wet snow either?


no , it's dry fluffy snow and yes what you said is what it does ,
and if i gear up to 3 or 4 when i get into the snow , it stalls ,
i have to be ready for the stall and stop and just let it idle ,
and it catches up with itself again
What size blower, and what engine?

it's a 22 inch with a briggs and stratton i forget the horse power ,
it's a two stage machine with 6 speeds