"tim..." Wrote in message:
"Jim K.." wrote in message
o.uk...
"tim..." Wrote in message:
I have a black metal bedframe a lot like this one
https://www.argos.co.uk/product/8261449
In my new house it really needs to be white.
How do I need to prepare the surface to achieve that
and then when I've done that, do I just spray it with paint from a spray
can?
I don't want to spend too long on this project, it's just the guest's
bedroom
TIA
tim
Key it a bit with wet & dry, degrease with a solvent (white spirit
or meths), when dry paint. I'd think you'll need an undercoat to
go from black to white especially spraying (outside or
garage/shed i hope ;-) )
unfortunately not, no
I'm just going to have to spray it with the windows open and then leave the
flat empty for 3 days - I'm not living in it yet
this frame bed, and a couple of chairs are the only pieces of furniture I
have moved in
Ah ok, plenty cardboard,wallpaper, old sheets whatever to catch
the overspray then :-)
I think it'll take more than one coat, don't be tempted to spray
more on "thicker" in one go as you'll end up with runs & it'll
look ****e, or you'll have to sand the runs back and do it again
(slower!)
--
Jim K
----Android NewsGroup Reader----
http://usenet.sinaapp.com/