On Mon, 3 Dec 2018 13:53:29 -0600, Terry Coombs
wrote:

* Well , Mr. Compressor has a case of the humms . That is , when I try
to start it , it just humms (until the O/L cuts it off if I let it go
that long). This is the original motor on an old Speedaire 60 gallon
tank , 220 volts and 3450 RPM's . Specs call for 15 amps full load ,
rated output is 2.98Kw , about 6 hp . This is an Emerson/Doerr
compressor duty motor .* Tested both caps , one is good and the other
isn't according to the tests with my DMM . Problem is that the bad cap
has rubbed the capacitance and voltage ratings off the label . Got a
couple of calls in , looked around on the internet , can't find a
definite answer . I'm pretty sure it needs to be around 250uf and at
least 250 volts - though maybe higher voltage to account for spikes . I
have the motor type/classification numbers , just can't find a reference
to check ... anybody got a lead on that type of info ?

250 should work. Be sure its at least 350 volts.

This may be of some use:

http://www.capacitorformotor.com/motor_capacitor.html

__

"Poor widdle Wudy...mentally ill, lies constantly, doesnt know who he is, or even what gender "he" is.

No more pathetic creature has ever walked the earth. But...he is locked into a mental hospital for the safety of the public.

Which is a very good thing."

Asun rauhassa, valmistaudun sotaan.


---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus