On 10/16/2018 7:13 PM, Bill wrote:
Meanie wrote:
Finishing my stair treads and risers with clear polyurethane. I sanded
up to 220 and the surface was very smooth to the touch. After 3 coats
of poly (4 coats on treads), the touch isn't really smooth.

My suggestion (and who the hell am i?) would be to lightly sand one
stair riser with 320-400, apply 2 or more coats of poly (separately),
and see if there is a significant difference. If you like the result,
you can repeat on the rest of the stuff, or not. Good luck!

Bill


I have small pieces from what I cut and experimented with the finish
before I began the actual fitted pieces. I can always play around with that.

Thanks