Dick,
I'd suggest (as in strongly recommend) getting the 1/4" bit holder
instead - lets you use ANY 1/4 hex type bit in the future - and if you
damage your T10 bit you only need to replace the bit - not the whole
(much more expensive) 1/4 inch square drive assembly.
Clare Snyder


Good point.
... and you might need an assortment of bits,
to go with that nice new bit holder ... :-)

http://www.leevalley.com/en/Wood/pag...411,43417&ap=1

http://www.leevalley.com/en/Wood/pag...411,43417&ap=2

John T.