On 2018/08/16 11:34 AM, Ralph Mowery wrote:
In article ,
says...

Where can I buy some small wire ( about # 28 to 30 ) that has the enamel
type of insulation that can be soldered and the heat will melt the
insulation ? There was some on ebay I bought that did not seem to work.
After checking it out, it seems that it needs to be heated to almost 400
deg C and when I tried that, it did not do all that well.

Before I dive into the magnet wire selection swamp, have you
considered using a chemical stripper or abrasive stripper?




Thanks for all the info Jeff.

I guess that wire like I really want is not around.

I am looking for an easy way to build circuits on a perf board. I
thougt it would be easy to just lay some magnet wire on a terminal and
let the solder melt the insulation. Then go to the next connection and
solder that one with out having to mechanically or chemically remove the
insulation. Does not look that type of wire is around.

So as I will have to find some method of stripping the wire, I might as
well continue like I have been doing and use the wire like the hard and
flopy drive cables. It is a small solid wire with the plastic type of
insulation. Easy to strip with just small wire strippers.



Look for WIRE WRAP wire, that meets your specs - the insulation melts
out of the way and is useful for low voltage work...

John :-#)#

--
(Please post followups or tech inquiries to the USENET newsgroup)
John's Jukes Ltd.
MOVED to #7 - 3979 Marine Way, Burnaby, BC, Canada V5J 5E3
(604)872-5757 (Pinballs, Jukes, Video Games)
www.flippers.com
"Old pinballers never die, they just flip out."