On 8/16/2018 12:47 PM, Oren wrote:
On Thu, 16 Aug 2018 12:12:15 -0500, Terry Coombs
wrote:

Â* Grrr , I was just down in the cellar trying to shoot some 2x2's to
the block wall , and it just ain't happening . I'm using a Hilti gun ,
uses strip shot in ,27 caliber . 2.5" pins thru the wood and into the
block . I'm wondering if being stored for a few months in the cellar
when I was having moisture problems has affected the cartridges , when
they were first bought they'd sink that pin partway into the wood . Now
3 shots in succession don't even set it flush . It makes no difference
whether I'm shooting into the mortar joint or the block itself .
I'd say you are on target. If the Hilti functions (clean) and then
the pins do not bend; narrows it down to the ammo. Are you putting
downwards pressure on the gun?

Â* Yup , you have to press it firmly against the work to push the barrel
into position to shoot . Unless the barrel is pushed all the way flush
with the housing it won't fire .

--
Snag
Yes , I'm old
and crochety .
Get off my lawn !