I haul a 250cc scooter on the back of our motorhome and use a commercial motorcycle carrier. The narrow ramp that came with it was too short, so I use an 8 foot 2x10 with 2x2 on each edge to make reasonably sure I keep the scooter on the ramp. Ramp is secured to carrier with 1/4 inch thick l-bar. I walk it up under power. Works great.


On Thursday, June 28, 2018 at 10:44:07 PM UTC-5, Ron wrote:
I'm thinking of making a motorcycle ramp 8 ft long & 3 ft wide with 3/4 inch
plywood to load a 600 lb bike on a car hauler trailer. Will the 3/4 " plywood
hold the weight?

--
for full context, visit https://www.homeownershub.com/woodwo...mp-817849-.htm