View Single Post
  #8   Report Post  
Posted to rec.woodworking
[email protected] hubops@ccanoemail.ca is offline
external usenet poster
 
Posts: 1,821
Default planter box lining

On Mon, 25 Jun 2018 05:37:20 -0700 (PDT), wrote:

On Sunday, June 24, 2018 at 11:57:34 AM UTC-4, Electric Comet wrote:
looking for the favorite planter box liner


or maybe i will just make drain holes


pond liner seems too stiff but seems to be the right stuff


Just went thru this exercise. Built 9 planters, all dovetailed corners, from PT lumber,
sealed inside and out with 2 coats of clear Cabot waterproofing.
Put 1/4" galv hardware cloth in the bottom, covered by weed blocking fabric.
Lined the planter with 6 mil poly letting it hang/drape over the top edge,
with the bottom scored so as to direct water to the bottom where it can drain.
Using Plastic J molding (think vinyl siding accessory) capped the planter top
and trimmed off the excess poly. Exterior of planter/capping was coated with
exterior solid stain. Plants are doing great, will not know till next spring
if/how well the planters themselves hold up...



... and it just takes-a-little-getting-used-to ..
the faint chemical taste in the tomatoes :-)
John T.