Let me add one more to the list. With an electric heater, one dead
element can cause some strange results. With either electric or gas a bad
dip tube or mis plumbed (incoming water connected to the hot (outlet) and
outgoing water connected to the cold water supply can cause such problems.

Five minutes, if it is really that long, would indicate a long string of
odd situations, like extra large supply lines, cold area, heavy heat sink
pipe material and very long runs from the heater to the outlet.

Do all the sinks tubs etc in you home have the same problem?

What kind of hot water heater do you have? Integrated with you home
heat, electric, gas, oil, no-tank?

--
Joseph E. Meehan

26 + 6 = 1 It's Irish Math


"PV" wrote in message
om...
Hello,

I bought a newly built house 3 years ago. At that time, I asked the
builder why it took so long, 3-4 minutes, before hot water came out of
the faucets when you first turned them on. He said that was the
standard wait.

I'm annoyed now that I have to wait so long for the hot water to come
out. The temperature of the water is fine and I have no problems with
running out of hot water. I want to know if there is something I can
install/replace to make the hot water get to the faucet quicker, in 1
minute instead of 5 minutes. And I have this wait with all of my
faucets, kitchen, shower and bathrooms.

Thanks for your assistance!