View Single Post
  #5   Report Post  
Posted to uk.d-i-y
Fredxx[_3_] Fredxx[_3_] is offline
external usenet poster
 
Posts: 3,157
Default Undersink electric water heater

On 21/06/2018 20:30, Tim+ wrote:
Fredxx wrote:
On 21/06/2018 15:32, Mike wrote:

I need a small, say 10 litre, electric water heater. But it's a gravity
water supply so only about 0.25 bar. Are there models that don't monitor
the supply pressure? Preferably A rated, unlike the cheap Italian ones
on eBay.


I would have said there are quite a few on the market.

Having it gravity fed means there is no need for a vent or expansion
vessel so virtually any model of undersink water heater will be ok.

I got mine second hand from ebay, but the likely suspects also do them,
Screwfix, TLC etc.

Most come well insulated, obviously the smaller the volume, the less the
surface area to lose heat.



But the faster itll cool down as its surface area to volume ratio is
bigger. Whether that matters in practice is another matter and will depend
a lot on your usage pattern.


These are device that are generally permanently plugged in, so the
temperature is always maintained.

The volume required is more down to the type of use its put to.

10 litres is a bowl full, and will then take a few minutes to re-heat
the next 10 litres.