On Sat, 09 Jun 2018 14:51:01 -0500, Markem
wrote:

On Sat, 09 Jun 2018 12:44:51 -0700, OFWW
wrote:

On Sat, 9 Jun 2018 12:20:19 -0700 (PDT), DerbyDad03
wrote:

On Saturday, June 9, 2018 at 1:37:39 PM UTC-4, Markem wrote:
Saw this in a fathers day article

https://goo.gl/yxKmtJ

For about $300.

Is 1.2 SCFM @ 90 PSI enough for decent usage?


You need to check the tools you use to see what they are rated as
needing.

For nailers probably, any other air tool probably not.

polisher 15 cfm @ 90psi
orbital sander 4 CFM @ 90 PSI
angle grinder 3 CFM @ 90 PSI small
air saw for 16 gauge 4 CFM @ 90 PSI
18 gage nailer 0.5 CFM @ 90 PSI
framing nailer 3 CFM @ 90 PSI
1/2" impact gun 6 CFM @ 90 PSI

Just to give you some of the items.

In order for specific air flow to be measured in SCFM, most experts
agree that the air flow must meet the following set of rigid
environmental circumstances;

The air temperature must be 68 degrees Fahrenheit
The relative humidity of the air must be 36%
The air itself must be measured at sea level

As far as I know basic cfm is what it says at the PSI it was rated as.