View Single Post
  #3   Report Post  
Posted to rec.woodworking
Sonny Sonny is offline
external usenet poster
 
Posts: 2,804
Default Gluing cedar for outdoor furniture

On Tuesday, June 5, 2018 at 10:57:07 AM UTC-5, Michael wrote:
I thought I would use your basic Titebond for this project, maybe coat the joints (mostly mortise and tenons) with acetone. But I read where other glues are preferable. What's the verdict?

Thanks,

Mike


Eastern Red Cedar? I've made benches, similar to the (link) pictured ones, that has been outside for years, with no problems. Titebond II was used..
https://www.flickr.com/photos/438361...posted-public/

One outside bench was looking so weathered I didn't want to refinish it, too much work. I gave it to a friend to refinish. Still solidly glued together.

I made Mom some cedar plant "stands" (stools?) - a slab with limbs glued onto the bottom. They held up for about 3 years, before needing repair/regluing.
Though this pictured plant stand is indoors, this is the basic construction of the outdoor stands.
https://www.flickr.com/photos/438361...posted-public/

On all these above projects, the holes drilled for the limb legs were fairly large, at least 1" diameter and fairly deep, as well. Hence, the beefy construction, along with gluing, made for their long term stability. *on some, the limb legs rotted before the joints fail, as the plants are watered and/or rained on.

Sonny