On Mon, 28 May 2018 20:49:28 +0100, Bill Wright wrote:


I have been using 1.5mm aluminium, mostly. Sometimes 2mm is better.

Bill

My remarks were applicable to mild steel. Folding aluminium I have no
experience of (except to say trying to fold ally that's too thick will
end up with stress fractures along the axis of the fold. Both unsightly
and strength compromised.





--
This message may be freely reproduced without limit or charge only via
the Usenet protocol. Reproduction in whole or part through other
protocols, whether for profit or not, is conditional upon a charge of
GBP10.00 per reproduction. Publication in this manner via non-Usenet
protocols constitutes acceptance of this condition.