On Topic: refrigerator seals
On Wed, 16 May 2018 08:08:15 -0500, Bill Gill
wrote:
On 5/15/2018 11:50 PM, T wrote:
Hi All,
On Topic.* Golly!
I have a regenerator with the freeze on the top.* The seal
on the freezer has a gap on the upper door opening side.
It won't stay bent back when I bend it back.* Its seems
to be crushed.
Is this gap on purpose to let air escape when closing the door
or should I replace the critter?
Many thanks,
-T
Replace it.
Bill
+1 If it has crushed there is nothing you can do.
The door gasket can be tested with the "dollar bill test". Holds the
dollar and has good resistance when pulled out when the door is
closed.
--
"We recommend using your hand to replace the fuse as it will take much longer using your knee."
|