Removing / Installing Fluorescent Starters
On Wednesday, 25 April 2018 16:32:15 UTC+1, Andrew Mawson wrote:
A friend has PLA printed a housing for his weather station sensor
electronics - this is mounted on a pole in the air exposed to all weathers
and so far has lasted over 4 years unaffected. However I have heard from an
acquaintance in Australia that PLA degrades in the high UV levels that they
get there.
Dipping in clear spirit based varnish effectively seals PLA - don't use
water based (for this or anything else for that matter !!!!)
Andrew
why?
|