Posted to rec.woodworking
|
|
How To Chamfer Cabinet Door Frame?
On Thursday, February 1, 2018 at 11:23:21 PM UTC-5, -MIKE- wrote:
On 2/1/18 9:57 PM, DerbyDad03 wrote:
On Tuesday, January 23, 2018 at 7:37:13 PM UTC-5, -MIKE- wrote:
...snip...
You could use any number of those bits and then run the stiles through
the table saw at 45degress to get your chamfer.
You would end up with a tiny little hollow triangle at the joint, but
you may not notice it, or you could fill it with putty.
I ran a full length chamfer on the rails and a stopped chamfer on the
stiles. After I assembled the doors, I filled the "over shoot" with
Durham's RockHard, then chiseled the chamfer square. I still need to do
a little cleanup, but they are coming out pretty good.
They are going to be painted, so I'm going to lose some detail, but so
be it.
https://i.imgur.com/y9jFZCJ.jpg
Looks great.
Thanks.
|