On 1/8/2018 9:46 AM, Bob La Londe wrote:

On 1/7/2018 9:03 PM, Gunner Asch wrote:
On Fri, 5 Jan 2018 11:39:22 -0700, Bob La Londe
wrote:

Anybody just happen to have a set of new old stock Fafnir MM9306WI2 DUH
ACBs they'ld sell relatively cheap?Â* I see one on Ebay, but its not
clear if its one bearing or a set.

I replaced the set on the XÂ* and its so smooth its scary.Â* It really
drew attention to the fact that the Y is not as smooth as it should be.

I guess I can't complain.Â* The machine is over 35 years old.

Timken replacements are pretty expensive.Â* RHPs are a little less.
If I
have to buy them I have to buy them, but that doesn't stop me from
shopping around a bit first.Â* Most MFGs don't seem to have the size at
all. 20 x 47 x 15.88 heavy preload.

Boca has a set that says light preload, but I'm not sure that's a good
idea.

Bob...CALL these people. Ask for an engineer.

https://www.vxb.com/

some of the best bearing prices Ive ever seen..and I buy a lot of
bearings.

They have everything from Grade 9 Swiss to 10 for a buck Chicom
bearings.Â* Im sure they will be able to take care of you well enough.

Im in there at least 2x a month.


Gunner

---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus


They were one of the first I contacted.Â* They couldn't even cross
reference the bearing.Â* Boca looked it up and got it wrong.Â* Eventually
I looked up the bearing on the Timken website (came up in a Google
search but not on a site search), and verified the dimensions and load.
Locate Bearings were able to cross reference it themselves, and when
they did they got it right.Â* It boiled down to who had what I wanted and
got the specs right the first time.

Its seems to be a bit of an odd ACB bearing these days.Â* 20 x 47 x
15.88. Only a few companies seem to make them anymore.

There were couple new old stock Fafnir sets on Ebay the week before
last, and I bought one.Â* I wish I had bought both sets.Â* Oh well. Others
are listed as one bearing, used, or for near retail of new stock Timken
bearings.


Just so you know. Locate Bearings has turned out to be mediocre at best
for service. Seems like another shop that tells you what you want to
hear to get your money, and then provides whatever level of service they
feel like.

I was told the bearings would ship on Friday by Priority Mail from
California. Instead they shipped UPS ground, on Monday from Illinois.
When something like that happens it always leaves me fearing I'm going
to receive a box of dirt. I guess I'll find out on Friday when the box
actually arrives.