On Saturday, December 9, 2017 at 9:18:48 PM UTC-5, Larry Flynn wrote:
Here is another post in my amateur What is it? tool thread. As usual, I will try to answer questions about their composition, size and how they can move. Pictures are provided via Dropbox.
L. Flynn
POST17_TOOL65. This wooden and metal tool is 7 inches long. A 1¼ inch diameter wheel is attached to one end. The wheel can rotate freely and its rim is ridged. I have hidden the manufacturers name and city but will give them as hints if the tool is not identified without them.
https://www.dropbox.com/s/bvgq890cyp...CALLH.jpg?dl=0
POST17_TOOL66. This wooden and metal tool is 9 inches long. The business end is 2½ inches wide and ends in six sharp 1-inch metal spikes. The tips of some of the spikes have broken. There is a manufacturers name and model number stamped into the metal. I have hidden them but will give them as hints if the tool is not identified without them.
https://www.dropbox.com/s/06hz81f1a1...CALLH.jpg?dl=0
Hints: Briddel No. 60
POST17_TOOL67. This metal tool is in the pliers family. The jaws range from 1½ inches when fully open to ¼ inch fully closed.
https://www.dropbox.com/s/wi20et1k2i...ICALL.jpg?dl=0
POST17_TOOL68. This metal and wooden tool is approximately 15 inches long.. The metal part is twisted and shaped to form two hearts. The wire is stiff with little flexibility ½-inch displacement with 5 lbs. perpendicular pressure at the top.
https://www.dropbox.com/s/c0gk8oi3tl...ICALL.jpg?dl=0