On 12/11/2017 10:07 AM, G Ross wrote:
Leon wrote:
I separated the tops from the bottoms and that made the grove around the
perimeter of the previous pictures of the boxes disappear.

https://www.flickr.com/photos/lcb112...posted-public/

https://www.flickr.com/photos/lcb112...posted-public/

The box opened with the detail of how the twp parts fit together.

https://www.flickr.com/photos/lcb112...posted-public/

And with the first coat of varnish on the sides.

https://www.flickr.com/photos/lcb112...posted-public/

https://www.flickr.com/photos/lcb112...posted-public/

By making the sides out of the same piece of wood and separating later
you naturally get the grain right on each side.Â* A bonus is that the
boxes do not have to be perfectly square as the top and bottoms glue up
at the exact same angles.Â* Less to worry about than if I had made the
tops and bottoms separately.

Beautiful, as always.Â* Do you do the dados with your table saw or with a
router table?

Thank you.

With the TS, much faster. Believe it or not, I'm cutting approximately
140 feet of groves for the 11 boxes. AND I am custom fitting the top
grove width to receive the plywood panel and the 1/16" thick veneer and
custom fitting for the the bottom plywood panel