On Fri, 10 Nov 2017 04:31:50 -0800 (PST), whisky-dave
wrote:

snip

Sounds like it's the upper limit stat that is cutting in and out on
the bigger element (only) ... before the main stat cuts everything
out? Do you have a IR thermometer? If so it might be interesting to
see what surface temperatures these clicks and measurements apply to.

We do have an IR thermo... good idea, providing I can find it.

;-)

What temperature would you expect say the half way up the fin should be.
I know it's to hot to hold on to as I tried.

I can't say for your rad but when I was experimenting with mine I
think it was pretty high ... as I think the thermal trip was set at
110 DegC or summat (but that may be wrong).

So, if you hear something click and the wattage from 2000 to 700, but
turning the main stat down sees the current drop to zero, the thought
is that the upper limit stat is cutting the power to the main element
(because the rad is overheating itself) before the main (room-ish)
temp stat is cutting the power to it all?

So, with the IR thermometer looking say midway up the rad, and you
monitoring the power drawn, see if you can work out a pattern between
the clicks, lights and temperature.

I believe on 2000W and the main (room-ish) stat on max, the rad is
unable to dissipate enough heat to stop it 'overheating' and therefore
it's modulating the power on the 'overtemp stat'.

If you turn the stat down to just above the current temperature, you
may find that (the main stat) will cut out (0W) before the overtemp
stat (leaving 700W).


If they are keeping them I'd be inclined to open one up and make a
wiring diagram (or see if there is one in there or in the manual).

The manual is on line and has the same details as the one supplied in the box.

Ok.

When you say 'they' it is the estates department I doubt they'd like me taking their new stuff apart and I don't particually want to.

When you say 'apart' you just mean the plastic end cover off. ;-)

I have an oil filled radiator at home that works as I'd expect it to, but then that one was over £100 rather than £35.

Shouldn't make any difference what it cost to how it works.

Cheers, T i m