On 10/15/17 11:28 PM, OFWW wrote:
On Sun, 15 Oct 2017 11:25:16 -0700, Electric Comet
wrote:

after a lot of fuss well not that much really

i decided not to have wheels on the work bench

i like a bench that stays put and the wheels that get out of the way
added too much bulk under the bench which i use for storage

some of the wheels get in the way like the rockler ones for 80

so i have a small hf dolly that i slap under it and move it that way

the bench is heavy but not so heavy that it is a two being job and
once i get the height set i may not move it much or at all


i do enjoy seeing some of the solutions that can be bought and the diy
are my favorite


search on workbench wheels to see some interesting contraptions

The rockler ones are fine, and you can buy adapter plates for them so
you can use them on more than one item. Easily moved.

Sometimes they are difficult to raise or lower and that is because of
the wheel position at the time, just rotate it a bit and it operates
ok. Although on heavy items you better be a big guy or extend the
levers a bit.

I'd prefer larger diameter wheels to roll over things a lot easier,
but to do that you have to DIY. And there are lots of videos for that
too.


I made my bench with wheels attached to a 2X6 that spans each end. The
wheels flip down under the bench feet when I want to move it (which is
rare) and then can be flipped up to the sides when parked letting the
bench rest on solid feet. The wheels are 5", which gives the bench a
nice height for sanding/finishing work. When the bench is on it's base,
it is perfect height for vise work and as a large outfeed table for the TS.

-BR