On 10/6/17 7:14 AM, Luckyaron wrote:
I've just installed a ceiling fan , there was no prior fan but there was a
switch at the door that controlled an outlet . the switch simply had a
12-2 w
ground going into it. Its a spst switch so black is going into switch as
well
as the white . now I tried running from power supply into switch out to fan
and ran the white past switch right to tbe white on fan no luck I'm getting
power to the fan but it's a remote fan an light with dimmer remote I tried
every way that ive been reading . can anyone explain how to wire this
I've got
12-2 with groundÂ* at switchÂ* with white being hot I need it switched and
fan
tied in to the switch ? https://www.homeownershub.com/img/b3


Safety warning. Turn the power off at the main breaker before
doing anything wiring related. Who knows what someone might've done
before you.
The black should be the power supply to the switch. The white
should be connected to the switch also. It will be the power supply to
the fan when the switch is turned on.
Mark it with colored tape at both ends to show it can be hot. Hook
that white wire to the fans colored, probably black, wire. There
should be another white wire there at the outlet. The fan's white wire
connects to that. That second white wire is the neutral and shouldn't
be switched.
You should've been able to leave the wiring at the switch as it
was. The only necessary wiring changes should've been at the outlet.