On 9/25/2017 3:35 PM, Dave M wrote:
I see that they actually start conducting well below 1uA, so I feel
confident that the 1N4104 will do the job for you.
All the other zeners that I found are SMD devices, so I doubt that
you'll be interested in any of those.

Previously I wrote:

The simplest is a 20K resistor in series with a 10v zener diode.
Use a low current Zener so the knee works right at low values.
Something like this:
http://www.mouser.com/ds/2/395/BZX55C2V0%20SERIES_D1610-1099630.pdf
Note, this is a DO-35 package.


--
Jeff-1.0
wa6fwi
http://www.foxsmercantile.com