View Single Post
  #31   Report Post  
Posted to alt.home.repair
Bob F Bob F is offline
external usenet poster
 
Posts: 8,803
Default installing gas lines to pool heater

On 8/31/2017 7:11 PM, Uncle Monster wrote:
On Thursday, August 31, 2017 at 6:52:22 PM UTC-5, trader_4 wrote:
On Thursday, August 31, 2017 at 6:45:39 PM UTC-4, Deodiaus wrote:
How much for running three existing pipes without changing existing work upsteam?
How much for replacing the all the piping from above ground to the heater?


Best thing to do is get two or three quotes from plumbers in your area.


Is black iron or galvanized recommended?


For outside, I'd use galvanized, that's what's used here in NJ.
There was a lot of debate on the merits of black pipe vs galvanized.
I'm not sure I ever understood the entire reasoning, but I think
some locations prohibited galvanized on the theory that the zinc
can flake off and possibly clog appliance orifices. It may have
been also based on some regions back in the day having nat gas
that was not as pure and which had some substance in it that reacted
with zinc. Galvanized is permitted here.

I wouldn't get hung up on the cost of replacing one part of what
you have in that pic versus all of it. Getting a plumber out,
doing one part of it, once he;s there, doing the rest shouldn't
make all that much difference in the cost. The pipe and fittings
don't amount to much and it goes pretty fast.



What do you mean by properly bonded, bonded to the concrete slab? The previous one was on the slab directly.


All the metal on that pool pad is required to be bonded together
electrically so that it's at the same potential. There should
be a heavy solid copper wire there connecting the pump, heater,
etc all together. There is a bonding terminal showing in the
pic you have of the new heater and the old one should have been
bonded when installed.



You never use galvanized pipe with natural gas around here. It's not allowed by the building inspection department. The gas company runs black iron pipe and paints it with light gray paint whenever it's outdoors. I've heard different reasons why galvanized pipe is not allowed raging from the zinc flakes off and clogs gas orifices to the zinc reacting with the NG producing a toxic byproduct.


My understanding is that problems relate to the actual gas composition
where you are. Some gas companies dis-allow it.