View Single Post
  #2   Report Post  
Joseph Meehan
 
Posts: n/a
Default Transformer is Buzzing -

Barry,

I don't know why, but your replies appears to be breaking the thread.

Maybe it was just a server burp or something on my end, or maybe it is
your software.

Since it has happened on more than one day, I would tend to believe it
is something to do with your software.

It does not really bother me, I have not even noticed it until just
today, but I would guess the original writer may never see many of your
responses.

--
Joseph E. Meehan

26 + 6 = 1 It's Irish Math


"barry martin" wrote in message
news:1532574208.6415.1.7097380.1139707488.RIMEGate ...
Billy:

B I have a 9VAC GE security system transformer that began to make a

faint
B buzzing sound and I'm worried this may be unsafe. The noise started a

week
B ago after several weeks of it *not* buzzing when first installed - or

at
B least I never noticed it. The unit does *not* appear "hot".
B
B I changed the receptacle that it is plugged into and checked for

grounding
B and it is properly grounded. I tested the voltage for 110v with a

multimete

B and it is steady at 110. I also swapped the transformer with a new one

but
B it still buzzes. Finally, I ran the transformer to another two outlets

and
B it buzzed on both, but each with different intensity.

A brand new transformer also buzzed?? Was it also designed for the GE
Security System? I'd try another transformer with the same ratings
from Radio Shack or a hardware store. 9v is 9v. You need to watch
the current capacity; greater is OK. (If the original transformer is
rated 300 mA and the new one is 500 mA [0.5 A] that's OK.)

The buzzing is usually the core plates vibrating; sometimes can be
"fixed" by tightening a (plastic) cable tie around it. When you
tested by moving from outlet to outlet you may have changed the
orientation of the xfmr some, such as on it's side.


B What could be the cause of this, and how do I fix it? Is this a

warning tha

B it should not be used or corrected?

Basicly the buzzing is just a nuisance sound. Probably wastes a
fraction of cent of electricity per year compared to a 'silent' xfmr.
Unless the noise is bothersome I'd leave it alone.

-
¯ barry.martinþATþthesafebbs.zeppole.com ®

* Euphemism for Death: Installed the Kevorkian Plug-n-Play
---
þ RoseReader 2.52á P003186
þ The Safe BBS þ Bettendorf, IA 563-359-1971
---
þ RIMEGate(tm)/RGXMod V1.13 at BBSWORLD *