On Saturday, August 12, 2017 at 2:26:40 PM UTC-4, Tekkie® wrote:
Ed Pawlowski posted for all of us...



On 8/12/2017 11:14 AM, James J Guinane wrote:
I had a so called professional installer do the installation. He
installed it
with an extreme tilt to the outside. Looks like at least 2 or 3 times what
the instructions call for. This concernes me because water does not drain
from the drain hole, it over flows from the opposite side of the unit.. I'm
also concerned that this extreme tilt may effect the opration of the
unit. Should I have the installer return and do the job right? I hope
that someone
can answer these questions for me. Thanks, Jim



No water should be draining. Properly leveled the water is slung to the
condenser coil where it evaporates. The guy did a crappy job.

To OP, I am unclear as to this: is the water coming inside? Have the
installer come back as Ed is spot on.

--
Tekkie

It sounds to me that it has an extreme tilt toward the outside. And I think the posters who say modern ones rely on the fan tossing some water up to help with the cooling are probably right. The install manual should spec the tilt.