On 2017/07/06 2:26 PM, Ian Field wrote:


"John-Del" wrote in message
...
On Thursday, July 6, 2017 at 11:18:38 AM UTC-4, wrote:
On Thursday, July 6, 2017 at 7:17:12 AM UTC-4, rickman wrote:
wrote on 7/6/2017 1:00 AM:
On Wednesday, July 5, 2017 at 9:34:41 AM UTC-4,
wrote:
On Wednesday, July 5, 2017 at 3:39:44 AM UTC-4, John Robertson
wrote:
On 2017/07/05 12:35 AM, wrote:
And if it has a large value (1000-4700uF) cap inside the
feedback loop that is failing, that can cause severe linearity
issues.

G²


Granted, however the OP did say he recapped the monitor and I
didn't
want to doubt his statement.

John ;-#)#

--
(Please post followups or tech inquiries to the USENET newsgroup)
John's Jukes Ltd.
MOVED to #7 - 3979 Marine Way, Burnaby, BC, Canada V5J 5E3
(604)872-5757 (Pinballs, Jukes, Video Games)
www.flippers.com
"Old pinballers never die, they just flip out."

its an IC, an LA7833( nte1773) . i'll change it out and see what
happens. i did change out every cap, and it was exactly the
same. no better, no worse.

thanks much

just got done replacing the vertical IC, la7833. no change in the
image. no better, no worse.

Looks like the 24 volt supply is generated by doubling the 12 volt
supply.
Measure the 24 volt supply at pin 6. I bet something is wrong that
this is
only 12 volts, maybe the diode?

--
Rick C


https://na.suzohapp.com/pdf/service_...vp2_manual.pdf


https://na.suzohapp.com/pdf/service_..._schematic.pdf


B+ is 12v3, 12V and 24V good. i was thinking yoke, but they ohm out
good, and look like brand new. no physical damage.

Not saying the yoke is the problem, but a single turn shorted to an
adjacent turn will not change the resistance reading on your dmm, but
a single shorted turn will totally collapse the magnetic field of the
coil.

A ringer is the best instrument to check for shorted turns.

DSE did one, but I don't think the kit is available anymore.

The schematic is floating about and there's no unobtanium in the parts
list.

The old DS ringer was designed by Bob Parker and was best for checking
flybacks (LOPTs), not much use on yokes I'm afraid. The kit is now made
by Anatek (we carry it on Flippers), but you would be better off with an
inductance meter - split the vertical windings and each side should be
identical.

John :-#)#

--
(Please post followups or tech inquiries to the USENET newsgroup)
John's Jukes Ltd.
MOVED to #7 - 3979 Marine Way, Burnaby, BC, Canada V5J 5E3
(604)872-5757 (Pinballs, Jukes, Video Games)
www.flippers.com
"Old pinballers never die, they just flip out."