wrote:
https://na.suzohapp.com/pdf/service_...vp2_manual.pdf

https://na.suzohapp.com/pdf/service_..._schematic.pdf

B+ is 12v3, 12V and 24V good. i was thinking yoke, but they ohm out good, and look like brand new. no physical damage. looks like a few transistors are after the vertical ic, i'm looking at them now. not real good at following this schematic, so any help is appreciated.

thanks

In the yoke there are two coils for vertical and two for horizontal connected in series or parallel depending on the design, if in parallel one coil connection could be broken. The coils are connected together in the solder posts on the yoke, you may check there if some wire looks loose.