View Single Post
  #49   Report Post  
Posted to sci.electronics.repair
John-Del[_2_] John-Del[_2_] is offline
external usenet poster
 
Posts: 446
Default [Q] dimmer switch for halogen floor lamp

On Wednesday, June 28, 2017 at 11:24:19 PM UTC-4, Phil Allison wrote:
John-Delusional ****wit wrote:

---------------------------------




One more thing: if you look at a halogen lamp crosseyed the filament will
fail from the shock of your stare.. The filaments are not supported as
they are in a standard incandescent lamp so they must not be subject to
shock or vibration.



** See pics of 150W halogen tube lamps:

http://www.destinationlighting.com/i...13549~zoom.jpg


http://www.homedepot.com/catalog/pro...eef67_1000.jpg

https://images.musicstore.de/images/...000456-000.jpg

How about a 1000W one:

http://ecx.images-amazon.com/images/...L._SL1500_.jpg



http://www.gelighting.com/LightingWe...m281-33642.pdf




Phallus'n emanated the following from his bunghole:


They are real pics published by folk who make and sell the lamps.


General Electric is one of the largest manufacturers of all kinds of lighting on the planet. Strangely, most folks who are not confined to an insane asylum would believe technical information from General Electric over some two-bit self aggrandized "technician" such as yourself.

This is what General Electric says about the subject:

"Unlike incandescent rough service or vibration service lamps, Halogen and HIR lamps are not equipped with filament supports because they would result in the de-rating of the life and lumens, and thusly defeat the purpose of providing extremely long life, energy savings and high lumen output. These features differentiate Halogen and HIR lamps from similar incandescent counterparts. However, these high performance lamps require more consideration and education when installing and aiming them."

Anyone who ever tried to use halogen lamps in portable clamp lights know they will be lucky to survive one minor bump, whereas even conventional incandescent lamps will survive several, and rough service incandescent lamps are extraordinarily tough.

GE says your wrong Phil. Everyone here *knows* you're a Wiki jockey. Do usenet a big favor and go back to fixing toasters and coffee makers and stop pretending to be playing with the big boys. Oh yeah, clean your trailer of roaches while you're at it...

https://groups.google.com/forum/?fro...v6zw%5B1-25%5D