Martin wrote:
On Wed, 26 Apr 2017 16:16:43 +0100, John Rumm
wrote:

On 26/04/2017 15:19, Stephen wrote:
Hello,

I have a freesat box that has two inputs but there is only one cable
going into the bedroom. Not wanting to climb ladders and fit new LNB
and cable etc. just yet, what should do with the unused input?

Leave it unused ;-)

The
manual says nothing. Do I leave it alone or should it be terminated?

It should be fine as is.

The humax in a twin tuner machine such that it can record and playback
at the same time from different channel bouquets. So to get full
functionality from its recording you would need s second feed from
either a multi output LNB, or from a multiswitch.

It is a Humax 1010S. I have one downstairs which has both inputs
connected and it is fine. The one upstairs is not working. The display
keeps going blank and the machine becomes unresponsive to the remote
or the buttons on the front. The only way to rescue it is to unplug
the power for a few seconds.

I have tried the factory reset option in he menu and that has not
helped.

The firmware is the latest version but that is dated 2016.

Sometimes whilst it is frozen the disk is whirring, not reading or
writing, but it is whirring and the box is warm to the touch.

Hard drive whirr when power is on. Can you here any drive access going
on at the time?

The Humax manual says that the noise is from the fan. Incidentally it must be
one of the worst manuals that Humax have ever produced.



I am going to email humax because I'm not sure if there is anything
else I can do?

Probably a good plan.

I can't wait for the answer. :-)


I have given up trying to understand PVRs. IME they have a female mind
of their own where logic and function doesn't operate. All 3 of ours
adjust their remote control functions on what seems like a daily basis
and I suspect the only way to prevent this is to do a factory reset and
reformat the hard drive.