|
|
|
|
New heat pump and furnace on the way.
In article ,
says...
Having my furnace and heat pump replaced in a few weeks.
The installer said that there are not enough wires for the thermostat
control, and that they will have to get into the attic to fish more wires
for the control, which is located on wall, I want to use the existing
location for the thermostat.
Once they get the wires into the wall, where the existing thermostat is,
they will run them to the furnace in the basement where the flue vent is, as
there is not access to the basement, the ceiling is finished.
I wonder how they are going to find the spot in the attic to drill the 2X4
header to fish more wire to the thermostat, I have no objection to drilling
a small hole in the ceiling above the thermostat as a reference guide.
Make sure they're experienced and reputable, and if they are, leave it
them. They'll be able to see the framing for the wall in the attic, and
they'll know where to drill.
Rick
|